Overview
The TPC116S1/TPC114S1/TPC112S1 are pin compatible 12-bit, 14-bit and 16-bit digital-to-analog converter, these series product are single channel, low power, buffered voltage-out DACs and are guaranteed monotonic by design. The devices use a precision external reference applied through the high resistance input for rail-to-rail operation and low system power consumption.
The TPC116S1/TPC114S1/TPC112S1 accepts a wide 2.7V to 5.5V supply voltage range. The parts incorporate a power-on reset circuit to ensure that the DAC output powers up to 0 V and remains there until a valid write takes place. The parts contain a power-down feature that reduces the current consumption of the device to 400 nA at 5 V and provides software-selectable output loads while in power-down mode. The power consumption is 0.45 mW at 5 V, reducing to 1μW in power-down mode.
The TPC116S1/TPC114S1/TPC112S1 on-chip precision output amplifier allows rail-to-rail output swing to be achieved. For remote sensing applications, the output amplifier’s inverting input is available to the user. The TPC116S1/TPC114S1/TPC112S1 use a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards.
The TPC116S1/TPC114S1/TPC112S1 are available in an small size 8-pin MSOP package, all package are specified over the -40°C to +125°C extended industrial temperature range.
-
Status
Production
-
Rating
Industrial
-
Resolution
12
-
VDD(V)
2.7~5.5
-
Channel
1
-
Output Type
Bufferred Voltage
-
Reference Type
Ext
-
Settling Time(μS)
14
-
Architecture
String
-
Output POR Status
0
-
INL
±2
-
DNL(LSB, Max)
±1
-
Offset Error(mV, Max)
±30
-
IDD(μA/CH, Max)(μA)
80
-
Gain Error (% of FSR, Max)
±0.3
-
Voltage Output Range(V)
0~Vref
-
D to A Glitch Impulse(nV-sec)
2
-
Interface Type
SPI
-
Temperature Range(℃)
-40 to +125
-
Package
MSOP8